通過式清洗機是采用特制的鏈條和傳送帶來運送工件，具有清洗、漂洗、吹水、烘干、涂油等功用。作為一款新穎的連續運送式清洗設備，通過式清洗機由人工將工件放在運送帶上，工件自動通過各清洗室進行清洗，清洗液自動流入回液箱，通過凈化處理可循環使用，并設有霧氣回收裝置，能夠不外接管路。

The through type cleaning machine uses specially designed chains and conveyor belts to transport workpieces, and has functions such as cleaning, rinsing, blowing water, drying, and oiling. As a novel continuous transportation cleaning equipment, the through type cleaning machine manually places the workpiece on the conveyor belt. The workpiece automatically passes through various cleaning rooms for cleaning, and the cleaning solution automatically flows into the return tank. It can be recycled through purification treatment and is equipped with a mist recovery device, which can avoid external pipelines.

通過式清洗機具有多工位，功用全，結構合理，操作便利，清洗作用好的長處，關于流水線零件的清洗，改善勞動環境，提高清洗質量有重要意義。其使用范圍廣泛，適用于各種五金零件，壓鑄件，液壓件，齒輪，軸承，汽車零部件等各種制造業。

The through type cleaning machine has the advantages of multiple workstations, full functionality, reasonable structure, convenient operation, and good cleaning effect. It is of great significance for the cleaning of assembly line parts, improving the working environment, and improving cleaning quality. It has a wide range of applications and is suitable for various manufacturing industries such as hardware parts, die-casting parts, hydraulic components, gears, bearings, and automotive components.

通過式清洗機作業前先檢查清洗液的配方濃度和配方比例是否適宜，水箱液面高度是否夠；別離調定清洗液箱和漂洗液箱的電接點溫度計為50-60度；用鑰匙將電源操控開關，置于開方位；敞開加熱器，使其開端自動加溫；敞開浮油掃除裝置開端浮油掃除，因而式水泵未敞開，水面平靜，排油作用好。

Before operating the through type cleaning machine, check whether the formula concentration and proportion of the cleaning solution are suitable, and whether the liquid level in the water tank is high enough; Set the electric contact thermometer of the cleaning solution tank and rinsing solution tank separately to 50-60 degrees; Use the key to control the power switch and place it in the open position; Turn on the heater to start automatic heating; Open the floating oil cleaning device to start the floating oil cleaning, so the water pump is not open, the water surface is calm, and the oil drainage function is good.

等溫度升到預訂值后即開端作業，操作者根據需要選擇開關，按每個單動按鈕，使水泵，吸霧，運送等全部動作。當機器運行后，操作工人便能夠在裝料口不斷地把零件裝載運送網帶，清洗，漂洗，吹干，輸出，在卸料口取下清洗好的零件。

After the temperature rises to the predetermined value, the operation begins. The operator selects the switch as needed and presses each single action button to activate the water pump, mist suction, transportation, and other functions. After the machine is running, the operator can continuously load and transport the parts onto the conveyor belt at the loading port, clean, rinse, blow dry, output, and remove the cleaned parts at the unloading port.

通過式清洗機清洗作業完畢后，當零件取下，按中止按鈕，全機中止。清洗液應定時添加自來水和必定比例的金屬清洗液以彌補消耗，使液面保持在必定高度，如果清洗作用達不到工藝要求時，應全部更換清洗液。整理設備塵垢后，封閉電源。

After the cleaning operation of the through type cleaning machine is completed, when the parts are removed, press the stop button to stop the entire machine. The cleaning solution should be regularly added with tap water and a certain proportion of metal cleaning solution to compensate for consumption, keeping the liquid level at a certain height. If the cleaning effect does not meet the process requirements, all cleaning solutions should be replaced. After cleaning up equipment dust and dirt, turn off the power supply.